--------------------------------------------------------------------------
New Software Version:   1.1.12
--------------------------------------------------------------------------
New Features/Changes/Fixes: since 1.1.10
2026-01-28

General Changes:
################
• [Improved compatibility with upcoming firmware security features]
This version of SEH Product Manager ensures full compatibility with upcoming SEH device server firmware updates introducing enhanced password security and login delay mechanisms. The Product Manager now prevents unnecessary login attempts (e.g. when an incorrect or missing password is stored), avoiding unwanted login delays on the device servers. Installing this version before updating your device firmware is recommended.
• Qt 6.9.3, OpenSSL 3.0.18 based
• Optimized device list handling (less blocking).
• Meta information compiled into the Product Manager executables (Properties). The uninstaller is now also signed.
• Certificates accepted in the browser window now also apply to the device list. Previously, this only worked if they were accepted permanently (“Always”).
• Adjustments for https-only on the device servers. If the connection via http fails, https is attempted. The value is saved for subsequent connections.

Fixes/Improvements:
###################
• Miscellaneous bugfixes
• [Fixed] If an IP address previously used by an SEH device server was later assigned to a non-SEH device, the Product Manager could display the non-SEH device’s website in the browser window.
• [Fixed] Sorting by the “Software Version” column could be incorrect when developer/test builds with long version strings were present.
• [Fixed] For unknown certificates, “Always accept” did not persist reliably. Certificate acceptance is now stored correctly for future connections.
• [Fixed] List items remain highlighted even when the device list is not in focus.


--------------------------------------------------------------------------
New Software Version:   1.1.10
--------------------------------------------------------------------------
New Features/Changes/Fixes: since 1.1.8
2025-04-30

General Changes:
################
• Qt 6.7.3, OpenSSL 3.0.15 based
• Optimized list structure, less blocking.
• When deleting the device list, the browser window is only emptied if it is also 
  activated. If the browser window causes problems, you can continue to use the rest 
  of the tool if you have deactivated the browser in the settings.
• Adjustments for the upcoming SEH print server software generation to display 
  information such as printer firmware and counter status.
• Adaptations for new PSi print server hardware variants.


Fixes/Improvements:
###################
• Miscellaneous bugfixes
• [Fixed] VS 2019 C/C++ Redistributable Runtime Libs were missing
• [Fixed] For UTN servers with “HTTPs only” activated, some columns (e.g. Hardware 
  Address and Serial Number) were not filled with the corresponding values, although 
  the device server certificate has already been saved permanently.


--------------------------------------------------------------------------
New Software Version:   1.1.8
--------------------------------------------------------------------------
New Features/Changes/Fixes: since 1.1.5
2024-01-18

General Changes:
################
• Qt 6.5.3, OpenSSL 3.0.11 based
• Certificate verification can now be switched off. 
	Note: The values of many columns cannot be retrieved without a valid or (permanently) accepted certificate.

Fixes/Improvements:
###################
• Miscellaneous bugfixes
• The "Immediate Peer Certificate" is used for manual certificate storage and verification. The validity (date) of the (peer) certificate is checked.
• New web interface of INU-100 (HW 2.0) is supported.
• Optimized handling of parallel uploads and downloads.
• Display of SHA-1 and SHA-256 certificate fingerprints.
• [Fixed] In BIOS mode (with legacy SEH print servers) the SW upload did not work
• [Fixed] USB Manager accounts were not taken into account during automatic login to the ControlCenter.



--------------------------------------------------------------------------
New Software Version:   1.1.5
--------------------------------------------------------------------------
New Features/Changes/Fixes: since 1.1.4
2023-10-27

General Changes:
################
• Hardware version of the products is displayed
• Clean listing of the IF-UTN20 in the USB device server category.

Fixes/Improvements:
###################
• Miscellaneous bugfixes
• Added navigation shortcuts in the browser window (Alt-Left, Alt-Right, Ctrl-R  	 
  and "Reload And Bypass Cache": Shift-Ctrl-R).
• "Open in Browser" function: the URL is now passed to the browser with the FQDN 
  (i.e. DNS name) instead of the IP address. 
  Note: The Product Manager only knows the DNS name if the user explicitly 
  specifies it when manually adding ("Add device...").
• For manually added devices, the stored IP address is not overwritten after the  
  SLP response. The IPv4 address from the SLP response string is now always 
  ignored and the IPv4 address of the sender is used.
• Support for the product IF-UTN-20.



 --------------------------------------------------------------------------
 New Software Version:   1.1.4
 --------------------------------------------------------------------------
 New Features/Changes/Fixes: since 1.1.3

General Changes:
################
• New: Hardware version of the products is displayed
• New: For EPS TSE Server 3 and 8 the following columns can be displayed:
		- Host name
		- Description
		- Contact

Fixes/Improvements:
###################
• Miscellaneous bugfixes 



--------------------------------------------------------------------------
 New Software Version:   1.1.3
 --------------------------------------------------------------------------
 New Features/Changes/Fixes: since 1.0.13
 
General Changes:
################
Major IPv6 Update from 1.0.x to 1.1.x

• New: IPv6 capable version. Support for IPv6 must first be activated in the 
       settings!
       (IPv4 is default. Selecting IPv6 is only suitable for IPv6 networks. If 
     	you are not sure about your network, select IPv4 and IPv6.)
• New: Possibility of importing and exporting the device list in order to store
		"device lists" on further SEH Product managers (pre-configuration
		without initial search).
• New: Option to download the monitoring file for dongleserver Pro and
		dongleserver ProMAX ("Backup monitoring log").
• New: Self-signed certificates on the products are accepted without demand.
		(Does not apply to the browser window!). This allows columns to be
		filled via https without user intervention.
• New: Zooming or scaling the browser window of the SEH Product Manager is
		possible.
• New: Support for printserver IF1-ES04 and PSi printserver.
• New: For printserver products, the following additional columns can be
		configured:
			- Printer model
			- Printer counter
			- Printer firmware

Fixes/Improvements:
###################
• Miscellaneous bugfixes
• [macOS] Shortcut to manually add devices placed on key mapping "Command-A" 
  (⌘ - A).

 --------------------------------------------------------------------------
 New Software Version:   1.0.13
 --------------------------------------------------------------------------
 New Features/Changes/Fixes: since 1.0.12

General Changes:
################
• Qt 5.12.10 based 
• Changed the US support number from +1-610-943-3226 to +1-610-933-2088

Fixes/Improvements:
###################
•	[FIXED] In some cases, umlauts were displayed incorrectly. All strings are now properly UTF-8 encoded.


 --------------------------------------------------------------------------
 New Software Version:   1.0.12
 --------------------------------------------------------------------------
 New Features/Changes/Fixes: since 1.0.11

General Changes:
################
• Qt 5.12.9 based 
• OpenSSL 1.1.1g 
• Support for Citizen OEM printserver interfaces

Fixes/Improvements:
###################
•	[FIXED] The ZeroConf wizard, which sets a ZeroConf route on the active 	 			network interface, did not work properly. 
•	[FIXED] Backup parameter was grayed out on printserver ONE and thus not functional.



 --------------------------------------------------------------------------
 New Software Version:   1.0.11
 --------------------------------------------------------------------------
 New Features/Changes/Fixes: since 1.0.7

General Changes:
################
• Qt 5.12.9 based 
• OpenSSL 1.1.1g 
• Compatibility with current EPS TSE Server software 21.0.18

Fixes/Improvements:
###################
•	A tooltip is displayed if a text does not fit into a column. 
•	Display of the strings in the info column is now used in the language of 	
	the corresponding web page of the device. 
•	[FIXED] Japanese version has errors in the "About" display 
•	[FIXED] SW-Update to multiple print server products at the same time was 	
	faulty 
• 	[FIXED] The "Export button" (in the monitoring area of the dongle server 	
	Pro/ProMAX Control Center) did not work in the integrated WEB presentation
	of SEH product Manager.

 --------------------------------------------------------------------------
 New Software Version:   1.0.7
 -------------------------------------------------------------------------- 
 New Features/Changes/Fixes: since 1.0.4

 General Changes:
 ################
 • Qt 5.12.8 based
 • OpenSSL 1.1.1d

 Fixes/Improvements:
 ###################
 • There are 2 new columns for selection: "Hardware address", "Serial number"
 • Bug fixes in the Japanese translations
 • About dialog adapted for Japanese version

--------------------------------------------------------------------------
New Software Version:   1.0.4
--------------------------------------------------------------------------
New Features/Changes/Fixes: INITIAL RELEASE
