If a USB device is connected to a client, the connection is of a point-to-point type. As long as the connection is established, other users cannot connect the USB device to their client and thus cannot use it. For this reason, you have to cut the connection once you do not use the USB device any longer.
To cut the connection between USB device and client, you deactivate the connection between the client and the USB port of the UTN or INU server to which the USB device is connected:
· Usually, the user deactivates the connection as described below.
· You can also set up an automatic deactivation: Auto Disconnect.
· In addition, the administrator can deactivate the connection via the Control Center. More information can be found in the system-specific user manual.
✓ The USB port is shown in the selection list.
✓ The USB port is connected to your client.
1. In the selection list, select the port.
2. Select Port – Deactivate from the menu bar.
➔ The connection will be deactivated.
Important: To remove a single USB device in the event of an error, select Port – Remove in the menu bar. |